For cushioned equalizers you'd want to measure the distance between the left and right bolt holes and we can pick out what you'd need from there. For example if the distance is between 7-1/4 inches and 8-1/4 inches the EZ Flex part # K71-653-00 would work great but if you have something else let me know. This kit comes with wet bolts and brass bushings too so that would be covered as well.
Then for a lift kit the Lippert kit part # RR23QX would give you a lift of 2 inches. view full answer...
Since you measured the drums and found they are 10 inch that is your best indication what you need as replacement assemblies. For that the best solution is the self adjusting assemblies part # AKEBRK-35-SA which will fit and work great. The numbers you listed don't match anything I was able to find though. view full answer...
The Lippert Scissor Stabilizer Jacks # LC285326 are only stabilizer jacks that should not be used to try and lift or lower your 2014 K-Z Durango 336RE.
For lifting the front for connecting and disconnecting the camper there are a couple options to help you with that. The jacks will have a manual override on the top of the jack. You will remove the access cap and use a ratchet to move the jacks. You can also disconnect the wiring on the jack and operate it remotely by powering the jack... view full answer...
If you are needing to replace the stabilizer jacks on your 2011 K-Z Durango 1500, we will have 2 different styles. The Stallion Stabilizer Jacks # 288-01892-2 are a drop down style so they are easy to use, but they are only rated up to 1,000 pounds and have 22-1/4" of travel. The Lippert Scissor Stabilizer Jacks # LC285344, on the other hand, are scissor jacks so they will be a little more difficult to deploy. However, they are rated up to 10,000 pounds (combined) and have 30" of lift.... view full answer...
Go To Results